REFILLING THE WATER TANK
The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using the Clean Air & Humidify Mode, or the Quick Clean Mode, the Water Tank should be filled with water.
|
| Tank Handle |
1 top.Remove the Water Tank by unlatching the | Water Tank | |
|
| Humidifying |
|
| Tray |
2 | Remove the Water Tank Cap and carefully | Water Tank |
fill the Water Tank with tap water. |
|
• Change the water in the Water Tank every day with fresh tap water.
ENGLISH
3 After filling, securely tighten the Tank Cap.
• Check to see that there is no water leaking.
• Be sure to wipe off any excess water on the outside of the Water Tank.
• When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up.
4 Replace the Water Tank in the unit.
• The top latch will “click” in place when the Water Tank is properly installed.
Tank Cap
tighten
CAUTION
•Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
•Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur.
•Use only fresh tap water. Use of other water sources may promote the growth of mold, fun- gus and/or bacteria.