Sharp KC-860U Operation, Clean Air & Humidify Mode, Clean Air Mode, Fill Water Tank. See E-11

OPERATION

Plasmacluster	Fan Speed	Quick Clean MODE Button	Power OFF
ON/OFF Button	Button	Clean Air & Humidify MODE Button	Button
Clean Air MODE Button

CLEAN AIR & HUMIDIFY MODE

Use the Clean Air & Humidify Mode to quickly clean the air, reduce odors and to humidify.

1 Fill Water Tank. (See E-11)

2 Press the CLEAN AIR & HUMIDIFY MODE Button.

•If the power cord was not unplugged between uses, the unit will automatically re-start at the previously selected

settings.

3 Press the FAN SPEED Button to select the desired fan speed. (See E-13)

About Automatic Humidify Mode

The Temperature/Humidity sensors automatically de- tect and adjust humidity according to changes in room temperature. Depending on the size and humidity of the room, humidity may not reach 45 - 55 %. In such cases, it is recommended that CLEAN AIR & HUMIDI- FY/MAX MODE be used.

Temperature	Humidity
64 and below	55%
64-75	50%
75 and above	45%

CLEAN AIR MODE

Use the Clean Air Mode when additional humidity is not required.

1 Press the CLEAN AIR MODE Button on the display.

• If the power cord was not unplugged between uses, the unit will automatically re-start at the previously selected settings.

2 Press the FAN SPEED BUTTON to select the desired fan speed. (See E-13)

E-12