OPERATION
MAIN UNIT OPERATION
Fan SpeedFan SpeedIndicatorIndicatorLightsLights
PlasmaclusterIonIoInIndicatorLight
MODEButton
PlasmaclusterIonIon ON/OFFButtonButton
POWERON/OFFF
Button
Button
Please select either Humidify mode or Clean air mode operation when operation when using.
Humidify mode : Fill Water Tank.(See
Clean Air mode : Drain Water Tank and Humidifying Tray.
Power ON/OFF Button
•Press to start operation (short beep) and stop operation (long beep)
•Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
•Unless the power cord has been unplugged, the opera- tions starts in the previous mode it was operated in.
MODE Button
• Press the MODE Button to select the desired fan speed. Indicator Lights will show the fan speed currently selected.
• The operation mode can be switched as below.
AUTO operation
The fan speed is automatically switched (between HIGH and LOW) depending on the amount of impurities in the air. The sensors detect impurities for efficient air purfication.
LOW operation
The unit will operate quietly using minimal air intake.
MAX operation 
The unit will operate at a fan speed of MAX.
MEDIUM operation
The unit will operate at a fan speed of MEDIUM.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion Indicator Light will turn on.(blue)
