Sharp LC-20B5M, LC-15B5M operation manual Preset, Upper control panel

Preset

On-Screen Display Language Selection Presetting the Channels (AUTO)

MENU on the LCD TV set can also be used to select the language.

Automatically tunes in and presets receivable TV stations. Make sure the antenna cable is properly connected.

Upper control panel			Upper control panel
3	1, 2	4	2	1

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the PRESET mode screen.

Auto(B/G)

VHF 1 48.25MHz

2 Press MENU (PRESET-1) twice to display the LANGUAGE select mode screen. Press MENU (PRESET-1) again to change the PRESET mode as shown below.

AUTO MANUAL LANGUAGE NORMAL SCREEN

NOTE

•Instead of pressing MENU for more than 2 seconds, you can display the LANGUAGE select mode by selecting Setup → Language on the Menu screen (see page 18).

E n g l i s h

3	O K	M	E
	Press CH (	)/( ) to select the language you wish

to display.

4 Press TV/VIDEO to return to the normal screen.

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds. The AUTO mode screen appears.

Sound System

Auto(B/G)

VHF 1 48.25MHz

2 Press VOL (–)/(+)(PRESET-2) on the upper part of the LCD TV set. All the TV stations in your area that can be received by the LCD TV set are automatically preset.

3 The screen shows whatever is on channel 1 when full auto channel preset is finished.

1

PAL

B/G

NOTE

• When starting PRESET after setting the SOUND SYSTEM with MENU of the Remote Control, the SOUND SYSTEM for all channels are stored into memory.

• Unused channels are automatically skipped.

• The Preset mode is only available in the TV mode and cannot be operated in the AV mode.

12