Recording a TV Programme in Real-time

Recording as a Motion Picture

Press Cyan to check that the desired recording mode has been selected and that the memory card has enough space for recording.

MAIN POWER

Card Lamp

When recording: Red

1

Press Channel Select, CH ( )/( ) or TV/VIDEO to

2

select the channel you want to record.

Press REC to start recording.

The recording is started from the moment the button is pressed.

To Pause Recording

Press .

• When resuming the recording, press REC once more.

P A U S E L a p 0 0 : 0 0 : 3 0 S P / R e m a i n v i d e o 0 : 3 2 2 : 1 8

To Stop Recording

Press .

By pressing Cyan, you can confirm the conditions during recording.

Press Cyan again to switch off the screen display.

NOTE

When the memory card runs out of space, “Card is full” will be displayed while in the Teletext mode, and the recording will stop.

When you press TEXT during the recording, “Cannot operate” is displayed. The recording itself continues.

During teletext broadcast, CAPTURE is functional. However, REC is not functional during teletext broadcast, and “Cannot operate” is displayed.

When MAIN POWER on the LCD TV set is pressed during recording, the recording cannot be stopped normally creating the danger the file is corrupted.

Pressing POWER on the remote control during recording stops the recording.

When the card has no remaining capacity left, the information display shows “Card is full” and the recording is stopped.

During recording, you cannot switch to a different channel and you cannot switch to another input.

When the timer reaches the stop time, the recording will be stopped.

When you select the COMPONENT mode, you cannot record a motion picture.

If the stop time is reached during timer recording the pause mode is switched on, but timer recording will continue.

Easy Recording

When pressing REC again during normal recording, you can easily switch to timer recording.

Each time you press REC, the recording time changes as follows.

Lap 0:30 1:00 1:30 2:00

R E C L a p 0 0 : 0 0 : 3 0 S P / R e m a i n v i d e o 0 : 3 5 2 : 1 5

*When the remaining time is indicated as [08:00], this means you can record for eight more hours.

32

Page 33
Image 33
Sharp LC-20B5M Recording a TV Programme in Real-time, Recording as a Motion Picture, Easy Recording, To Pause Recording