Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit | “AA” size battery (×2) | AC cord (×1) | Stand unit (×1) and Operation manual (×1) |
(×1) | Page 10 | Page 9 | Screws (×3) |
Page 10 |
|
| Page 8 |
NOTE
• Always use the AC cord supplied with the TV/DVD.
QUICK REFERENCE
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
•Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV/DVD falling over.
1
2
Confirm the 3 screws supplied with the TV/DVD.
Screws (X3)
Remove the covering sheet of the stand.
1Insert the stand to the bottom of the TV/DVD.
2Insert and tighten the 3 screws into the 3 holes on the
bottom of the stand.Soft cushion
3For protection, sheets are covering the product. Please remove these sheets before use.
NOTE
• To detach the stand, perform the step in reverse order.
Screw
8
