Sharp LC-19DV28UT operation manual Connecting to External Equipment, When using Hdmi cable Input

Connecting to External Equipment

You can connect many types of external equipment to your TV/DVD. To view external source images, select the input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)

For connecting the TV/DVD to external equipment, use commercially available cables.

CAUTION

•To protect equipment, always turn off the TV/DVD before connecting any external equipment.

•Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

■ When using HDMI cable (INPUT 3):	is an audio-video interface that enables a connection for audio and
The HDMI (High Definition Multimedia Interface) terminal

video signals using a single cable. The HDMI terminal supports high-resolution video input.

•Blu-ray disc player

•DVD player

•HD cable/satellite set-top box Rear of the TV

HDMI-certified cable

HDMI OUT

NOTE

•Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.

•Digital Audio output is not available when using an HDMI input.

■When using DVI-HDMI conversion cable (INPUT 3):

•Blu-ray disc player

•DVD player

•HD cable/satellite set-top box Rear of the TV

Ø3.5 mm stereo minijack cable DVI-HDMI conversion cable

DVI OUT AUDIO

NOTE

•When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI Audio” to “DVI”. (See page 28.)

16