A2 Stereo Broadcast Selection
To let you enjoy A2 stereo broadcasting, this LCD TV set receives A2 stereo system and bilingual broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
•Each time you press MPX, the mode changes between “STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
(When stereo sound is received)
49 | 49 |
STEREO | MONO |
Bilingual
The LCD TV set is receiving a bilingual broadcast.
•Pressing MPX changes the audio mode in the order shown below.
•MAIN=main sound or SUB=sub sound, can be selected.
(When main sound is received)(When sub sound is received)
49 | 49 |
MAIN | SUB |
NOTE
• The setting can be selected individually for each channel number.
If the sound quality is poor due to a weak signal or other problems during A2 stereo broadcast reception, set the “OFF” position of the A2 to change the TV sound to monaural.
1 Press MENU to display the Menu screen.
2 Press \/to select “SETUP”.
3 Press '/" to select “CH SETUP”, and press OK.
4 Press '/" to select “MANUAL”, and press OK.
5 Press '/" to select “A2”, and press \/to select “OFF”.
| P O S I T I O N | C H 1 | |
| C O L O U R S Y S T E M | A U T O | |
| S O U N D S Y S T E M | B / G | |
| S K I P | O F F | |
| F I N E | 6 9 5 . 2 5 M H Z | |
| N I C A M | O N | |
| A 2 | O F F |
|
|
|
|
|
•When the A2 sound is set to the “OFF” position, the TV sound is output in monaural.
(When the “OFF” position is selected)
49
“b” is displayed when A2 is set to “OFF” during A2 stereo broadcast.
6 Press MENU to exit.
NOTE
•When the A2 sound is set to the “OFF” position, MPX cannot be used to change the audio mode (stereo and bilingual settings).
21
