Sharp LC-32X20S, LC-37X20E, LC-37X20S Inserting a CA Card

Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set. (Page 8)
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Carefully insert the CI Module in the CI slot with
the contact side forward.
The logo on the CI Module
must be facing forward from
the rear of the TV. Do not use
excessive force. Make sure
the module is not bent in the
process.
1
2
Checking CI Module information
NOTE
• Make sure that the CI Module is properly inserted.
• This menu is only available for digital stations.
Press MENU and the menu screen displays.
Press c/d to select “Digital Setup”.
• The content of this menu depends on the provider of
the CI Module.
Press a/b to select “CI Menu”, and then press
OK.
Press a/b to select the following desired item,
and then press OK.
1
2
3
4
Connecting external devices
E Module
General information on CI Module displays.
E Menu
Adjustment parameters of each CA CARD displays.
E Enquiry
You can input numerical values such as passwords
here.
NOTE
• The content of each screen depends on the
manufacturer of the CI module.
Removing the CI Module
Remove the cover from the rear of
the set.
Remove the module from the set.
Replace the cover.
1
2
3
19
LC-3237X20E-gb.indd 19LC-3237X20E-gb.indd 19 2007/08/31 16:58:182007/08/31 16:58:18