Basic adjustment

E Sort

Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you
want to move, and then press OK.
Press a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 3 and 4 until all desired channels
are sorted.

E Erase Programme

An individual programme can be erased.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you
want to erase, and then press OK.
• A message screen pops up.
Press c/d to select “Yes”, and then press
OK to erase the selected programme. All the
subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
1
2
3
4
1
2
3
4
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Channels with “Skip” set to “On” are passed over when using
Pr/Ps even if selected while watching the image from the
TV.
When connecting a decoder to the unit, you need to select
EXT1 or EXT2.
NOTE
• “Off” is factory preset value.
You can block the viewing of any channel.
NOTE
• See “Child Lock” for setting a PIN.
• When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of the
channel are blocked.
• When pressing 6 while “Child lock has been activated.”
displays, the PIN input menu will display. Inputting the
correct PIN lifts the child lock temporarily until the power is
turned off.

Analogue channel settings

Programme Setup

Setup

Analogue setting

You can reconfigure Analogue TV channels settings
automatically or manually.

E Additional search

Use this menu to add new channels automatically after
auto installation has been made.
• Start searching channels after selecting colour system and
sound system.

E Manual Adjust

Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press a/b/
c/d to select the channel you want to set and
the press OK.
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 - 9.
EXAMPLE
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Select the optimum colour system to receive. (Auto,
PAL, SECAM)
Select the optimum sound systems (Broadcasting systems)
to receive. (B/G, D/K, I, L/L’)
Skip
Decoder
Lock
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel names.
Press a/b/c/d to select each character of
the new name for the channel, and then press
OK.
Repeat step 1 above until the name is fully spelt
out.
NOTE
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select “END” to
set the channel name.
1
2
Label
27
LC-3237X20E-gb.indd 27LC-3237X20E-gb.indd 27 2007/08/31 16:58:372007/08/31 16:58:37