Connecting external devices

SCART connection

Example of connectable devices

Example of connectable devices

E Decoder

E VCR EDVD recorder

EWhen using the EXT 1 (SCART) terminal

EWhen using the EXT 2 (SCART) terminal

 

 

If your VCR supports TV-VCR advanced AV Link

 

 

systems, you can connect the VCR using a fully wired

 

 

 

 

SCART cable.

SCART cable

SCART cable

SCART cable

Decoder

VCR Decoder

NOTE

In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Manual adjust” in the “Analogue Setting” menu. (Page 27)

TV-VCR advanced AV Link systems may not be compatible with some external sources.

Do not connect the decoder to the EXT2 terminal.

You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under the EXT2 in the “Input Select” menu.

Controlling devices with SCART using AV Link

This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual equipment.

One Touch Play

While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e.g. VCR, DVD).

TV Standby

When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD) enters standby mode as well.

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers the channel preset information from the tuner on the TV to the one on the connected audiovisual equipment (e.g. VCR) via the EXT 2 terminal.

NOTE

Refer to the operation manuals of external equipment the details.

Only works when the audiovisual equipment is connected to the EXT 2 terminal on the TV with AV Link via a fully wired

SCART.

The use of the AV Link function is only possible if the TV-set has enforced a complete auto installation with the connected audiovisual equipment. (Page 9, initial auto installation)

The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type of equipment used, it is possible that the described functions may be completely or partially unusable.

17

Page 19
Image 19
Sharp LC-37G20S, LC-37B20S, LC-37G20E, LC-37B20E, LC-32G20S Scart connection, Controlling devices with Scart using AV Link