Other useful features
Setting when using external devices
Input source settings
Option
Input Select
For setting the signal type of external equipment.
Item
EXT 1: Y/C, CVBS, RGB
EXT 2: Y/C, CVBS, RGB
EXT 3: Auto,
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
•When the signal type is set to “Auto”, the input terminal where a cable is connected is automatically selected.
Setup
Input Label
You can assign each input source a label as you prefer.
1
2
3 Press a/b/c/d to select each character of the new name for the input source, and then press OK.
|
|
| DVD |
|
|
|
|
|
| |
A B C D E | F | G | H | I | J CLEAR | |||||
K | L | M N O | P | Q | R | S | T BACK | |||
U | V W | X | Y | Z | + | _ |
| |||
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | END |
4 Repeat until the name is fully spelt out.
NOTE
•The name can be 6 characters or less.
•When you want to set an input source name of less than 6 characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
EXT2
EXT3
DVD
EXT5
EXT6
NOTE
• You cannot change labels if the input source is TV.
Skipping specified input
Setup
Input Skip
This setting allows you to skip the SCART, HDMI or RGB input on the “Input Select” menu.
EXT 1 (SCART) |
|
| |
EXT 2 (SCART) |
|
| |
EXT 4 | (HDMI) |
|
|
EXT 5 | (HDMI) |
|
|
EXT 6 | (HDMI) | Yes | No |
EXT 7 | (RGB) |
|
|
Colour system settings
Option
Colour System
You can change the colour system to one that is compatible with the image on the screen.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, SECAM).
Additional features
Setup
Standby Mode
You can reduce the TV’s
Item
Mode1: The TV quickly starts up from standby. 30W or more of power consumption is required.
Mode2: Power consumption is small during standby.
32
