Motorola and V.32bis, V.34-SDC, 326X V.34 manual Feature Italy Japan Malaysia Netherlands

Feature		Italy	Japan		Malaysia		Netherlands
ATH					Test=Busy Out (ATH1)
Test					Restricted all models
ATX							Always=4
Call Progress							ATX4
AT&D7					Restricted
108.2/Bsy
AT&G			Restricted
Guard Tone
AT&J	Restricted		Restricted		Restricted		Restricted
Telco
AT&P	Always=38%		Always=33%		Always=33%		Always=38%
Pulse Cycle	AT&P2		AT&P1		AT&P1		AT&P2
AT*AA	Manual	AT*AA0
Answer	Ring #2	AT*AA2
	Ring #4	AT*AA4
AT*BD	4 Sec	AT*BD1	Always=4 sec				Restricted
Blind Dial	Using S6	AT*BD2	AT*BD1
AT*CD
Loss Dis
AT*DD	4 sec	AT*DD2	3 sec	AT*DD1	2 sec	AT*DD1	15 sec	AT*DD5
Dial Wait	6 sec	AT*DD3	4 sec	AT*DD2	4 sec	AT*DD2	30 sec	AT*DD7
	15 sec	AT*DD5	6 sec	AT*DD3	6 sec	AT*DD3	40 sec	AT*DD8
	Using S7	AT*DD9			Using S7	AT*DD9
AT*DP							Always=3 sec
Pause Delay
AT*DR	Off	AT*DR0	Off	AT*DR0	Off	AT*DR0
Auto Redial	1	AT*DR1	1	AT*DR1	1	AT*DR1
	2	AT*DR2	2	AT*DR2	...	...
	3	AT*DR3			8	AT*DR8
	4	AT*DR4
AT*LL					Restricted
LAL Busy Out
AT*LN					Restricted
DTE Pin 25
AT*TL	Always=72 ms		Always=72 ms		Always=72 ms		Always=72 ms
Tone Length	AT*TL0		AT*TL0		AT*TL0		AT*TL0
AT*TT	30 sec	AT*TT0	30 sec	AT*TT0	30 sec	AT*TT0			Country-Specific Information
Call Timeout	Using S7	AT*TT5	45 sec	AT*TT1	60 sec	AT*TT3
					90 sec	AT*TT2
					Using S7	AT*TT5
AT*PT							Dial=Auto
Dial							Restricted
DL TX Level	Always=-9 dBm		Set to -15dBm; adjustable		Always=-9 dBm		Always=-6dBm
			from 0 to -15 dBm
LL TX Level	Always=-13 dBm		Set to 0dBm; adjustable		Always=0 dBm		Always=-6dBm
			from 0 to -15 dBm

Country-Specific Information C-9