Motorola and V.32bis, V.34-SDC, 326X V.34 manual Installing a Ferrite Cylinder on an Audio Cable

Installing the Modem

Installing a Ferrite Cylinder on an Audio or Network Management Cable

Do the following for each cable:

1)Snugly wrap the cable twice completely around the cylinder (Figure 2-5).

2)Set the cable into the cylinder cutouts.

3)Ensure that 1 to 1-1⁄2 inches of the cable protrude from the cylinder (on the end you insert into the backplane connector).

4)Snap the cylinder closed. You can reopen and close it to reset the cable.

5)Insert the cable into the modem backplane connector (with the ferrite cylinder close to the backplane connector).

To Line Jack

Audio Cable

Cutout

To Connector On	Ferrite Cylinder
Modem Rear Panel

Cable Looped Twice

Around Cylinder

1"- 11/2 "

Figure 2-5. Installing a Ferrite Cylinder on an Audio Cable

Installing a Ferrite Cylinder on a DTE Cable

Do the following for each DTE cable:

1)Pass the DTE cable through the cylinder.

2)Set the cable into the cylinder cutouts.

3)Position the cylinder as close as possible to the plug you install on the back- plane connector.

4)Snap the cylinder closed. You can reopen and close it to reset the cable.

5)Insert the cable into the DTE connector on the modem backplane connector, with the ferrite cylinder close to the backplane connector.

2-8 Installing the Modem