Motorola 326X V.34, and V.32bis, V.34-SDC manual Compliance with DTI 83/009I, Compliance with BS6301

Compliance with DTI 83/009I

This modem has been approved for use of the following facilities:

•Loop disconnect and multifrequency signaling

•Storage of telephone numbers for retrieval by a predetermined code

•Detection of initial proceed indication

•Operation of the absence of proceed indication

•Automatic dialing facilities

•Tone detection, i.e., Ring Tone, etc.

•Multiple repeat attempt facility

•Automatic clearing from call originating end

•Call progress monitor

•Series connection

•Modem

•PBX timed break register recall

•Auto answer

Any other usage will invalidate the approval of the apparatus if, as a result, it ceases to conform to the standards against which approval was gained.

This apparatus is only approved for compatible PBXs. Motorola Information Systems Ltd. should be consulted for an up-to-date list of compatible PBXs.

There is no guarantee that the apparatus will work in all circumstances. Any difficulty should be referred to Motorola Information Systems Ltd.

This apparatus is suitable for connection to a PABX which returns secondary proceed indication.

Compliance with BS6301

Only apparatus conforming with BS6301 may be connected to the telephone socket on the rear of the modem.

Any interconnection between the above socket and the other modem connections, directly or by way of other apparatus, may produce hazardous conditions on the BT network. Advice should be obtained from a competent engineer before any such connection is made.

Compliance with BABT SITS 83/009 Section D

Caution

Do not enter more than two “4” second pauses following the initial access digit (or digits). Failure to comply with this requirement may result in unsatisfactory operation.

Information Country-Specific

Country-Specific Information C-35