Configuration Quick-Reference

Table A-1.

AT Commands, Cross-Referenced to Front Panel Options (Continued)

AT

Parameter &

 

Command

Option

Description

 

 

 

AT*MN5

=9600

 

AT*MN6

=12.0

 

AT*MN7

=14.4

 

AT*MN8

=16.8

(V.34 modems only)

AT*MN9

=19.2

(V.34 modems only)

AT*MN10

=21.6

(V.34 modems only)

AT*MN11

=24.0

(V.34 modems only)

AT*MN12

=26.4

(V.34 modems only)

AT*MN13

=28.8

(V.34 modems only)

AT*MN14

=31.2

(V.34 modems only)

AT*MN15

=33.6

(V.34 modems only)

 

DSR

DSR Control

 

 

Determines how the modem sets the DSR signal.

AT*MR0

=Normal

DSR is controlled by the modem.

AT*MRl

DSR=High

DSR is always on.

AT*MR2

=DTR

DSR follows DTR.

AT*MR3

=Drop on Disc

The same as the normal setting except that when a disconnection is initiated from the local end,

 

 

DSR is dropped immediately.

AT*MR4

=Sim LL

The same as the DTR setting except DSR is dropped when the remote modem requests a

 

 

disconnect.

 

AT Msg

AT Message

 

 

Determines when the AT connect message is sent to the DTE.

AT*MS0

=After CD

The AT connect message is sent to the DTE after DCD is raised.

AT*MS1

=Before CD

The AT connect message is sent to the DTE before DCD is raised.

 

Max Rate

Maximum Rate

 

 

Sets the maximum rate at which the modems communicate over the analog network. Options

 

 

available vary with the modulation mode.

AT*MX0

=300

 

AT*MX1

=1200

 

AT*MX2

=2400

 

AT*MX3

=4800

 

AT*MX4

=7200

 

AT*MX5

=9600

 

AT*MX6

=12.0

 

AT*MX7

=14.4

 

AT*MX8

=16.8

(V.34 modems only)

AT*MX9

=19.2

(V.34 modems only)

AT*MX10

=21.6

(V.34 modems only)

AT*MX11

=24.0

(V.34 modems only)

AT*MX12

=26.4

(V.34 modems only)

Gray shading indicates country-specific options. See Appendix C for your country’s options.

A-24 Configuration Quick Reference

Page 146
Image 146
Motorola 326X V.34, and V.32bis, V.34-SDC manual AT Msg, AT Message, Max Rate, Maximum Rate