Motorola and V.32bis, V.34-SDC, 326X V.34 manual Table A-4 Dial Modifiers

Configuration Quick-Reference

Table A-4.

Dial Modifiers (Continued)

Modifier	Function	Description
@	Quiet	Makes the modem look for one or more ringbacks (followed by
	Answer	five seconds of silence) within the delay time specified by Call
		Timeout. If five seconds of delay silence is detected, the modem
		continues to dial the string. If the line is busy, the modem hangs up
		and sends a BUSY message to the DTE. If the modem does not
		detect delay silence or a busy signal, the modem hangs up and the
		screen displays NO ANSWER.
R	Reverse	Must be the last character in the dial string before a carriage return.
		The R modifier makes the modem originate the call in answer
		mode and is used to dial an originate-only modem. Immediately
		after the dial command is processed, an answer-back tone is gener-
		ated and the modem attempts to complete the connection for the
		length of time specified by Call Time-out.

HDiscon- Makes the modem disconnect from the dial line. This must be the

h	nect	last modifier in the dial string, and must also be preceded by a
		semicolon. If this modifier is not preceded by a semicolon, it is
		ignored by the modem. The modifier can be entered through the
		front panel, the AT ACU, or network manager.
(space)	Presen-	These characters do not act as modifiers. They are presentation
. (period)	tation	characters that are ignored.
- (dash)	characters
( ) paren-
theses

A-40 Configuration Quick Reference