Motorola V.34-SDC, and V.32bis, 326X V.34 manual Installing a Ferrite Cylinder on a Power Cable

Installing a Ferrite Cylinder on a Power Cable

Do the following for each power cable of a Modulus enclosure populated with 3267 and 3268 V.34 Modems.

1)Snugly wrap the cable once completely around the cylinder (Figure 2-6).

2)Set the cable into the cylinder cutouts.

3)Ensure that 1 to 1-1/2 inches of the cable protrude from the cylinder (on the end you insert into the backplane connector).

4)Snap the cylinder closed. You can reopen and close it to reset the cable.

5)Insert the cable into the Modulus enclosure connector (with the ferrite cylinder close to the connector).

To Power Jack

Power Cable

Cutout

Installing the Modem

Ferrite Cylinder

Cable Looped Once

Around Cylinder

1"- 11/2 "

To Modulus Enclosure Connector

Figure 2-6. Installing a Ferrite Cylinder on a Power Cable

Installing the Modem 2-9