Motorola and V.32bis, V.34-SDC, 326X V.34 manual Operating Notes, Standalone Modem Rear Panel Views

Country-Specific Information

Operating Notes

This section summarizes useful operating information.

•Restricted front panel option settings do not appear in front panel menus

•PC software communication packages often send fixed initialization strings to the modem (via AT commands). These strings do not account for country- specific modem restrictions.

To make software communication package installation easier, the modem responds as follows:

— If you enter a restricted AT, AT *, or AT& command for an option that is completely restricted, the modem displays OK instead of ERROR. The modem, does not, however, modify its configuration in this case.

IMPORTANT: The command does not change the modem configuration. An OK lets the software package continue communication with the modem. Some software packages may be affected by this new functionality. Motorola recommends that you change the initialization string of your software communication package for the restricted options or option settings that may apply in your country. Refer to the software package documentation for further information.

— If you enter a restricted AT, AT *, or AT& command for an option that has some restricted settings, the modem displays ERROR

—If you enter a restricted V.25 bis command, the modem responds with the INValid message, INV

Standalone Modem Rear Panel Views

This section shows rear panel views for models 3260, 3261, 3265, and 3266.

Following each illustration is a list of the countries that use that modem version.

NOTE: For Models 3262, 3263, 3267 and 3268, the addendum, 326X Series Modem Cards (shipped with the modem backplane), contains enclosure card and backplane information.

C-12 Country-Specific Information