Configuration Quick Reference A-43 | Motorola and V.32bis, V.34-SDC

Table A-5.

Result Codes (Continued)

Word Form Response	Numeric Form Response
CONNECT 2400 RELIABLE EC=(xxx) DC=(yyy)	30
CONNECT 4800 RELIABLE EC=(xxx) DC=(yyy)	31
CONNECT 7200 RELIABLE EC=(xxx) DC=(yyy)	35
CONNECT 9600 RELIABLE EC=(xxx) DC=(yyy)	32
CONNECT 12000 RELIABLE EC=(xxx) DC=(yyy)	36
CONNECT 14400 RELIABLE EC=(xxx) DC=(yyy)	37
CONNECT 16800 RELIABLE EC=(xxx) DC=(yyy)	38
CONNECT 19200 RELIABLE EC=(xxx) DC=(yyy)	34
CONNECT 21600 RELIABLE EC=(xxx) DC=(yyy)	39
CONNECT 24000 RELIABLE EC=(xxx) DC=(yyy)	41
CONNECT 26400 RELIABLE EC=(xxx) DC=(yyy)	84
CONNECT 28800 RELIABLE EC=(xxx) DC=(yyy)	85
CONNECT 31200 RELIABLE EC=(xxx) DC=(yyy)	87
CONNECT 33600 RELIABLE EC=(xxx) DC=(yyy)	88
CONNECT 38400 RELIABLE EC=(xxx) DC=(yyy)	42
CONNECT 48000 RELIABLE EC=(xxx) DC=(yyy)	82
CONNECT 56000 RELIABLE EC=(xxx) DC=(yyy)	83
CONNECT 57600 RELIABLE EC=(xxx) DC=(yyy)	76
CONNECT 64000 RELIABLE EC=(xxx) DC=(yyy)	77
CONNECT 72000 RELIABLE EC=(xxx) DC=(yyy)	78
CONNECT 76800 RELIABLE EC=(xxx) DC=(yyy)	79
CONNECT 96000 RELIABLE EC=(xxx) DC=(yyy)	80
CONNECT 115200 RELIABLE EC=(xxx) DC=(yyy)	81
CONNECT 128000 RELIABLE EC=(xxx) DC=(yyy)	86

NOTES:

1)When CONNECT messages are displayed, xxx indicates which error- correction scheme (LAPM or MNP 1-4) the modems are using, and yyy indicates which data compression scheme (V.42bis or MNP-5) the modems are using.

2)When a reliable connection has been established with the remote modem, the RELIABLE result code is displayed only when the Mode option (under the

EC/DC OPT’S menu) is configured for Reliable (AT*SM2), Auto Rel

(AT*SM3), or Spd AutoRel (AT*SM4). Also, the Rel Msg option (under the ACU OPT’S menu) must be set for Long (AT*XC2) or Short (AT*XC1).

Also, you receive error-correction and data-compression information in your result code only when the Rel Msg option is set to Long.

Configuration

Quick-Reference

Configuration Quick Reference A-43

Image 165

Motorola and V.32bis, V.34-SDC, 326X V.34 manual Configuration Quick Reference A-43

Contents

Motorola Restricted Rights Notification for U.S. Government Users Proprietary Material Page Contents Installing the Modem Using the AT Automatic Calling Interface Appendix B. Cabling and Interface Pinouts Glossary Return Procedures Contents 326X Series Modem Family Using the Documentation Set OverviewProduct Family Model Numbers This Model Number... Denotes How to Use the Documentation Set Using the Documentation SetDocumentation Target Audience 326X V.34 Series Modem Reference Card T0009-01 326X V.34 Series Modem User’s Guide T0009 References Trademarks326X Series Modem Reference Guide Special Notices Using the Documentation Set Conventions Mise en Garde Messages spéciauxAvertissement Besondere Hinweise Using the Documentation Set Avisos Especiales PrecaucionAdvertencia Xviii Introduction Motorola Information System Group ISG Customer Information Sales-Related Issues Information on Product Training Motorola ISG Customer InformationQuestions about Billing User Documentation Comments about the Manual Xxii Customer Response Card Business Reply Mail Chapter Contents From a network management system NMS Introduction Repair Safety and Operational Notices Lightning Operating the Modem from the Front Panel Selecting Programmed Option Sets Automatic Calling Interfaces ACUs25bis ACU Modulation Mode Characteristics ITU-T V.34 Compliant Modulation ModeManaging a Modem Restoring Data Transmission Synchronous Data Compression SDC Feature Automode/Multimode FeatureCompatibility in V.34 Modulation Mode Error Correction and Data Compression Remote ConfigurationSecurity Status Snapshots Adaptive Rate System Troubleshooting V.54 and V.22bis TestsCountry-Specific Information NET Compliance Modem Chapter Installing the Modem Appendix C Appendix B Unpacking the Modem U.S.A Outside the U.S.AOne User’s Guide One Reference Card Choosing a Site Additional Equipment Required Rear Panel Connectors Connecting the ModemAn AC power switch Modular jacks for making Operating at V.34 DTE Rates Electrical Interfaces-EIA/TIA-232 and ITU-TS Models 3261 and 3266 Dial Line Connections Ferrite CylindersModels 3267 Modems Installing a Ferrite Cylinder on a DTE Cable Installing a Ferrite Cylinder on an Audio Cable Installing a Ferrite Cylinder on a Power Cable Installing a Ferrite Cylinder on a Power Cable Important Information About the Modulus Enclosure Important Information About the Modulus Enclosure Front Door Cabling the Modem 3265 Modem Cabling Connecting to a 9110 NMS Connecting the Modem to a Network Management System Turning on the Modem 11. Connecting Modems in a Daisy Chain Configuration Handling Error Messages After Installing the ModemAutomatic Self-Test Self-Test Messages Installing the Modem Getting Started Contents Configuring and Operating the Modem System Requirements for Software UpgradesUsing the Front Panel If You Are Unsure of Your DTE’s Data Format 326x Ready 326X LEDsName Description RC/NC Front Panel Display Setting Configuration Options from the Front Panel Navigating the Configuration Menu TreeMenu Structure Front Panel Keys Example Accessing a Configuration Option Talk/Data SwitchStatus Displays Where Do I Go from Here? Using the Modem with a Network Management System NMSOperating Status Displays Option Sets/Dialing Options Using the Modem with an Async Terminal Using the AT Automatic Calling Unit ACU Selection, refer to Using the Modem with a PC and Async Communications Software 25bis ACU for Sync or Async Applications Other Call Establishment MethodsNetView LPDA-2 ACU for Sync Applications NetView LPDA-2 ACU for synchronous applications External Auto-Call Units Sync Dialing from an IBM ASPage Option Set 4-Synchronous Leased Line Applications with Configuring the Modem Configuring the Modem for Use with Communications Software Select the Modem’s Preconfigured Option SetCommunications Software Package Operating Notes General Notes Operating Notes Set Modem Flow=Off Direct Operating Mode Preparing for Operation Reinitializing Memory Using the AT&F CommandIf the Communications Software and Modem Do Not Operate Reinitializing Memory from the Front Panel What is an Option Set? Configuration Option SetsOption Set Summary-326X V.32bis and V.34 Modems Option Set Summary-326X FAST-SDC Modem Option Set Descriptions-326X V.32bis and V.34 Modems Option Set 1-Async Calls to Central Site Using the AT ACU Option Set 2-Sync Dial A/B Restoral Option Set Descriptions-326X FAST-SDC Modems Option Set 3-Sync Dial Only To create a customized option set Configuring an Option Set Do not turn off modem power until Save COMPLETED! appears Option Set Defaults-326X V.32bis and 326X V.34 Modems Option Set DefaultsSave Changes=n Option Set Parameter 3260/62/65/67 3261/63/66/68 Terminal OPT’S XON/XOFF Option Set Defaults-326X-SDC V.34 Modem Option SetOption Option Set 3261/63/66/68 DTE Rate Auto 56.0 U.S. A., Canada Other countries Flow Ext Cntrl Pin Inactivity S30 For This Type of Application Select 326X V.32bis and 326XFAST Modem Application Examples Changing Default Configuration Settings Option Set 1-Async Calls to Central Site Using AT ACU Option Set 3-Sync Calls to Central Site, V.25bis ACU Option Set 2-Sync Answering Central Site Without ACU Synchronous Dialing from an IBM AS Mode=Originate in the other modem 326XFAST-SDC Modem Application Examples SDC Pre-Operation Notes Configuring the Modem for SDC OperationOperational Requirements Optimizing Network Performance SDC Option Set 1-Async Calls to Central Site Using AT ACU Ensuring Optimum Network Performance in SDC ModeSDC Sample Applications SDC Option Set 2-Sync Dial A/B Restoral To 33.6 kbps X-SDC Dial-Only Application-Option Set SDC Option Set 3-Sync Dial Only Bandwidth On Demand-Option Set Bandwidth On Demand Select SDC Option Set 4 for this application Point-to-Point Leased Line Application with Dial Restoral Remote Access Reset When Remote Access Reset Is DisabledOperation Configuring the Modem Using the AT Automatic Calling Interface Industry-Standard AT Command Set-AT and AT Using AT Commands What is the Attention AT Command Set?Entering AT Command Lines To enter a single AT command line AT Command String Examples To enter multiple AT commands on a single command lineFor Further Detail on AT Commands Interpreting AT Command Strings Escape Sequence-+++ Autobaud FeatureValid Autobauding Character Formats Start Bit Data Bits Parity Stop Bits To use the escape sequence with guard time Non-Configuration AT Commands Re-Execute Last Command ATA, Manual AnswerATD, Dial ATO, Leave Command Mode ATH, Hang UpATI, Display Software Information AT*RD, Redial Last Number RegistersDisplaying and Changing S-Register Values Display S-Register Value ATSn? Display S-Register Value AT? Register DescriptionsChange S-Register Value ATSx=n Change S-Register Value AT=x Register 2-Escape Code Character Register 1-Ring CountRegister 3-Carriage Return Character Register 4-Line Feed Character Register 5-Backspace Character Register 6-Wait for Dial ToneRegister 7-Wait for Data Carrier Register 10-Carrier Loss Hang Up Delay Register 8-Pause Time for Pause Delay Dial Modifiers Register 18-Test Timer Register 11-DTMF Tone DurationRegister 12-Escape Code Guard Time Register 25-Delay Before Looking for DTR Register 26-RTS/CTS DelayRegister 30-DTE Inactivity Disconnect Register 45-Access Security Tone Duration Register 38-Disconnect Buffer DelayRegister 46-Access Security Lead Digit Delay Timeout Register 96-Signalling System #5 Register 97-Break Signal Duration Register 99-V.32 Training Time Register 98-AC Detect Troubleshooting Guide Troubleshooting Steps TroubleshootingAssumptions First Step Call Establishment Max Rate AT*MX Min Rate AT*MN Data Mode Flow control Call Termina Tion Fast Call=Off AT*FC0 in it Modem won’t connect Test Description Command 326X Series Modem Diagnostic Tests To initiate a test from the modem’s front panel Synchronous Data Compression SDC TestingPage Appendix a Configuration Quick Reference Configuration options and functions Configuration Quick-Reference-Menu TreesFor More Detail Audience and Assumptions Figure A-1. The 326X Series Modem Menu Structure Part 1 Figure A-2. The 326X Series Modem Menu Structure Part 2 Figure A-3. The 326X Series Modem Menu Structure Part 3 Figure A-4. The 326X Series Modem Menu Structure Part 4 Dial From Stored #=nAsync Echo Speaker VolumeDial RsltCode Select Options Longspace Guard Tone Reinitialize MemoryGuard Tone Display Modem ID Line TelcoAT Form Pulse Cycle CTS Control RTS signal from the DTE, set the modem RTS= NormalMode=Direct DSR Control Clock Power UpEnter Phone # Answer Ans Rest Asym Rate Blind Dial Auto TypeBreak Mode Default Dialing See the AT&Z command descriptionBuffer Delay =Off Off setting disables the Delay option Dial Wait Data CompressionDial Wait DTE Rate RTS/CTS Delay Data FormTo D DTR Delay Pause DelayAuto Redial Stored# Flow Control Flow DTE Ct Hold DL LineLine Compen To L LAL Busy Out Pstn SignalingLink Phone #’s Low Speed Modem Flow ModMin Rate AT Message AT MsgMax Rate Maximum Rate Netwrk Comp BuffersView Phone # Ext Cntrl Overspeed PasswordSet Protection Unlock Pass Change Pass RestoreWord Rmt Acc Parity ParityRTS Control Retrain Inactivity Speed Conver Throughput Minimization Delay RTS/DCD Remote SignalingRemRTS/DCD TpDlyMin Call Timeout Call TimeoutTone Length Tone Length Access security password from the remote modem Callback FeatureDisplays only when selected by an NMS This command defines dial command limitations Rem Num Rqrd Remote Number Required Password VerificationSim Ring Simulated Ringback Table A-2 Front Panel Configuration Options V25 Resp Sync IdleLPDA2 Addr LPDA2 Det OverrideMode Group PWNC Address NC PortRate Front Panel Option Description Performing Numeric Entry Register/AT Command Cross-Reference Register AT Command Front Panel OptionTable A-3 Register Cross-Reference Dial Modifiers for Special Dialing Requirements Table A-4 Dial ModifiersModifier Function Description Table A-4 Dial Modifiers Table A-5 Result Codes Result Codes Connect Configuration Quick Reference A-43 Configuring the Modem’s Dual In-line Package DIP Switches Table A-6 Rear Panel SwitchesSwitch Number Setting Function Configuration Quick Reference A-45 Page Cabling and Interface Pinouts Appendix B Pin 232-D ITU Signal Definition 326X/326X-SDC cabling requirements and diagnosticsEIA/TIA 232-D Modem to Computer Interface Table B-1 Modem/Computer Interface Connections Models 3261/3263/3266/3268 only. Signal passed from modem to Figure B-1 XFAST-SDC Series Modem with ITU V.35 Interface ITU Recommendation V.35 Modem-to-Computer Interface Pin Signal Definition ITU Rate V.35 Modem-to-Computer Interface PinoutsTable B-2 ITU V.35 Modem/Computer Interface Connections Differences, EIA/TIA 232-D and ITU Rate V.35 Interfaces Dial LINE, Lease Private LINE, Phone Connector Pinouts NC Network Control Port Pinouts Table B-3 Network Control Port Connector PinoutsCabling Cable Considerations Table B-4 Maximum Cable Capacitance per Data Rate Motorola Product Up to Description Code Kbps ft Kpbs ft Table B-5 Motorola DB-25 Low Capacitance Cables for Table B-6 Vendor Wire for DTE Cable Diagnostics Cabling and Interface Pinouts B-11 Page Appendix C Canada Country Support Restricted Features Summary Installation NotesModels 3265/3266 All Models AT*AA1 Setting AT Command Feature Australia Austria Belgium Canada Czech Republic Feature Poland Denmark Finland France Feature Germany Hong Kong Ireland Israel Feature Italy Japan Malaysia Netherlands Feature Norway Portugal South Africa Spain AT*DD2 AT*DD3AT*DR1 AT*DR2 AT*DR3 AT*DR4 AT*LL AT*DD4 AT*DD3 Feature Sweden Switzerland United Kingdom UniversalAT*DD3 S7 AT*DD9 AT*DP AT*DR1 AT*DR2 AT*DR3 AT*LL Standalone Modem Rear Panel Views Operating Notes Dial Only Modem Modem Rear View Leased Line, Dial RestoralModem Rear Panel Dial Only Figure C-3.View a Rear Panel Layout 3265 Dial Only Modem Rear Panel-View a Modem Rear Panel-View B Modem Rear Panel-View CModem Rear Panel-View D Modem Leased Line with Dial Restoral For an Illustration of the Enclosure Card Backplane Rear Panel Interface Pinouts Wire Leased Line Interface Models 3260/3265Standalone Models 3260/65 and 3261/66 Interface Pinouts Dial Line Interface Models 3260/3265 Phone Connector Interface Models 3260/3265 Wire Leased Line Interface Models 3261/3266Dial Line Interface Models 3261/3266 Table C-6 Wire Leased Line Interface Models 3261/3266 Card Models 3262/67, 3263/68 Backplane Interface Pinouts Phone Connector Interface Models 3261/3266Dial Line Interface All Card Models Table C-7 Phone Line Interface Models 3261/326 Wire Leased Line Interface Models 3263/3268 Wire Leased Line Interface Models 3262/3267Table C-9 Wire Leased Line Interface Models 3262/3267 Table C-10 Wire Leased Line Interface Models 3263/3268 Delayed and Forbidden Lists Australia-Delayed Call ListsAustria-Forbidden Call Lists Belgium-Delayed Call Lists France-Delayed and Forbidden Call Lists Finland-Delayed Call Lists Ireland-Delayed Call Lists Hong Kong-Delayed Call Lists Norway-Delayed Call Lists Netherlands-Delayed Call Lists Other Country-Specific Information Spain-Delayed Call ListsCanada DOC Registration and Requirements Canadian Emissions Statement Industry Canada Equipment Attachment Limitations Table C-13 Phone Connector Pinouts for Jack Operation Table C-12 Dial Line Connector Pinouts for Jack OperationRear Panel Pinouts Modem Table C-14 Dial Line Connector Pinouts for Jack Operation Table C-15 Phone Connector Pinouts for Jack OperationTelco Option AT&J Denmark-Blind Dialing Hong Kong and United Kingdom-BABT RegulationsCompliance with BS6328 Part 1 1982 Section Compliance with BABTSITS/82/01/C and BABT/SITS/ 82005S/D Compliance with BS6305 Clause 6.2, BS6320 ClauseRinger Equivalence Number REN Compliance with BS6789 .11986 Clause Compliance with BABT/SITS/83/08/A Clause Compliance with DTI 83/009I Compliance with BS6301Compliance with Babt Sits 83/009 Section D Installation of Telephone Socket Application for Installation of Telephone SocketFCC Registration FCC Regulations Pin Voice Jack Permissive Dial Line Jack TypesPin Data Jack Programmable Jack Type Description Table C-17 Phone Connector Pinouts for Jack Operation Table C-16 Dialline Connector Pinouts for Jack OperationJack Leased Connector Pin No Function Dial Line Telco Jack Selection Table C-19 Phone Connector Pinouts for Jack Operation Table C-18 Dial Line Connector Pinouts for Jack Operation Dial and Leased Line Transmit Levels Connecting an Exclusion Key TelephoneMaking Telephone-to-Modem Connections Dial Line Transmit Level RJ4MB4 Declaring The Jack Type Using the Modulus Backplane’s Busy Out Feature Table C-20. Backplane Pin Settings for Busy Out, Modulus Table C-21. Backplane Pin Settings for Busy Out, ModulusPin Pair Function A. and Canada Other UI Countries Modem a Modem B Country-Specific Information ACU Glossary CRC EIA ITU-TS Pstn SYN Return Procedures Expiration of Lease Equipment Return ProceduresFactory Repair Packaging Guidelines for Equipment Return Index DOC FCC Phone SDC Index-6