Motorola and V.32bis, V.34-SDC, 326X V.34 manual Appendix C Appendix B

Introduction

Installing the Modem

Appendix C

Appendix B

This chapter describes how to install and connect a 326X Series Modem. In this chapter, you:

•Unpack the modem

•Choose an appropriate site to install the modem

•Familiarize yourself with the modem’s rear panel and connectors

•Connect the modem to a PC or other data terminal equipment (DTE)

•Connect the modem to a telephone handset (if appropriate) and to the dial/leased telephone line jacks

•Attach ferrite cylinders, if necessary

•Connect the modem to a Network Management System (NMS), if appropriate

•Turn on the modem and run the unit’s automatic self-test

IMPORTANT: Telephone company and governmental regulations vary by country. Your modem’s rear panel layout and cabling may vary from that shown in this guide.

Refer to Appendix C for a description of the modem rear panel and cabling; important safety guidelines for connecting the modem in your country; and regulatory restrictions and requirements.

To order cables, refer to Appendix B; then contact your Motorola sales representa- tive or local distributor for ordering information.

NOTE: If you are installing a 326X Series Modem card, refer to the addendum, 326X Series Modem Cards, shipped with your modem’s backplane.

2-2 Installing the Modem