Motorola and V.32bis, V.34-SDC, 326X V.34 manual Installing the Modem

Contents (continued)

Troubleshooting (V.54 and V.22bis Tests)	1-9
Country-Specific Information	1-9
NET Compliance	1-9
CE Regulatory Marking Directive (93/68/EEC)	1-9
Chapter 2. Installing the Modem
Introduction	2-2
Unpacking the Modem	2-3
Additional Equipment Required	2-4
Choosing a Site	2-4
Connecting the Modem	2-5
Rear Panel Connectors	2-5
Ferrite Cylinders	2-7
Cabling the Modem	2-11
Connecting the Modem to a Network Management System	2-13
Turning on the Modem	2-14
Automatic Self-Test	2-15
After Installing the Modem	2-15
Chapter 3. Getting Started
Introduction	3-2
System Requirements for Software Upgrades	3-2
Configuring and Operating the Modem	3-2
Using the Front Panel	3-2
Navigating the Configuration Menu Tree	3-5
Setting Configuration Options from the Front Panel	3-5
Using the Modem with a Network Management System (NMS)	3-7
Using the AT Automatic Calling Unit (ACU)	3-8
Other Call Establishment Methods	3-10
V.25bis ACU for Sync or Async Applications	3-10
NetView LPDA-2 ACU for Sync Applications	3-10
Sync Dialing from an IBM AS 400	3-11
External Auto-Call Units	3-11
Chapter 4. Configuring the Modem
Overview	4-2
Communications Software Package Operating Notes	4-2
Configuring the Modem for Use with Communications
Software	4-2
Operating Notes	4-3
If the Communications Software and Modem Do Not Operate	4-5
Preparing for Operation	4-5
Reinitializing Memory from the Front Panel	4-5

vi