Motorola V.34-SDC manual Register/AT Command Cross-Reference, Table A-3 Register Cross-Reference

Configuration Quick-Reference

S-Register/AT Command Cross-Reference

This section shows the modem’s S-Registers cross-referenced with AT Commands and front panel options. (For details on S-Registers, refer to Chapter 5, Using the AT Automatic Calling Interface.)

Table A-3.

S-Register Cross-Reference

S-Register	AT Command Front Panel Option
S0—Ring Count to Answer On	AT	*AA5	Answer=Using S0
S1—Ring Count	—		—
S2—Escape Code Character	—		—
S3—Carriage Return Character	—		—
S4—Line Feed Character	—		—
S5—Backspace Character	—		—
S6—Wait for Dial Tone	AT	*BD2	Blind Dial=S6
S7—Wait for Data Character	AT	*DD9	Dial Wait=S7
S7—Wait for Data Character	AT	*TT5	Call Timeout=S7
S8—Pause Time for Pause Delay Dial	AT*DP4		Pause Delay=S8
Modifiers
S10—Carrier Loss Hang Up Delay	AT	*CD3	DCD Loss Dis=S10
S11—DTMF Tone Duration	AT	*TL1	Tone Length=S11
S12—Escape Code Guard Time	—		—
S18—Test Timer	—		—
S25—Delay Before Looking for DTR	—		—
S26—RTS/CTS Delay	AT	*DL4	RTS/CTS Delay=S26
S30—DTE Inactivity Disconnect	AT	*SI5	Inactivity=S30
S38—Disconnect Buffer Delay	AT	*DB3	Delay=S38
S45—Access Security Tone Duration	—		—
S46—Access Security Lead Digit Delay
Timeout
S96—Signalling System #5	AT*S96		=0 to 1
S97—Break Signal Duration	AT*S97		=0 to 39
S98—AC Detect	AT*S98		=0 to 1
S99—V.32 Training Time	AT*S99		=0 to 216

A-38 Configuration Quick Reference