Preparation
Supplied accessories
Remote control unit ( x 1) | AC cord ( x 1) | Cable clamp ( x 1) | Stand unit ( x 1) |
|
|
| For 32 inch models |
| Product shape varies in |
| For 40/46/52 inch models |
| some countries. |
|
|
Pages 3 and 6 | Page 8 | Page 8 | Page 5 |
•Operation manual (this publication)
•“AAA” size
Attaching the stand unit
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are eight screws with the stand unit.
Models | Screws |
32 inch models
AB
40/46/52 inch models
3Inserting the stand.
1Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).
2Insert and tighten the four screws into the four holes on the rear of the TV.
CD
2Attach the supporting post for the stand unit onto the base using the four screws with screw driver as shown.
*
2
2
1
Soft cushion
1
Supporting post
*32 inch models: Use Screws B in the table in step 1.
*40/46/52 inch models: Use Screws D in the table in step
*32 inch models: Use Screws A in the table in step 1.
*40/46/52 inch models: Use Screws C in the table in step 1.
NOTE
•To detach the stand unit, perform the steps in reverse order.
•A screw driver is not supplied with this product.
•The stand base is made of glass. Therefore, be careful not to drop the stand base or apply pressure to it.
•Do not place heavy objects on the stand base.
5
