Quick guide
ESearching for cable broadcasts
To change each item to the appropriate settings:
1Press a/bto select the menu, and then press ;.
Scrambled stations | [Yes] |
Search method | [Channel] |
Start frequency |
|
Network ID | [None] |
Symbol rate 1 |
|
Symbol rate 2 |
|
QAM modulation 1 |
|
QAM modulation 2 |
|
Reset |
|
Search start |
|
2Press a/b/c/dor 0_9 to select or input
the appropriate item/value, and then press
;.
3Press a/bto select “Search start”, and then press ;.
4The TV searches for, sorts and stores all the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
H
•The “Scrambled stations” menu and the “Search method” menu are not displayed on the screen as each menu item is fixed.
•The value of “Start frequency” and “Network ID” should be set to the value specified by the cable provider.
Menu | Description | Selectable items | |
Scrambled | Specifies if you |
| |
need to add | Yes, No | ||
stations | |||
services. |
| ||
|
| ||
|
|
| |
|
| Channel: Extracts all | |
|
| of information from a | |
|
| channel (quick, but | |
Search | Specifies how you | needs corresponding | |
method | search channels. | TV stations). | |
|
| Frequency: Checks | |
|
| every frequency in | |
|
| range (slow). | |
|
|
| |
Start |
| From 47.0_858.0 | |
frequency |
| MHz | |
| Specifies the network. |
| |
| Set this to register |
| |
Network ID | only the specified | None, 0_65535 | |
network ID without | |||
|
| ||
| registering any special |
| |
| services. |
| |
|
|
| |
| The symbol rates |
| |
Symbol | are specified by the |
| |
cable provider. Input | 1000_9000 | ||
rate 1* | |||
the value received for |
| ||
|
| ||
| CATV. |
| |
|
|
| |
| The symbol rates |
| |
Symbol | are specified by the |
| |
cable provider. Input | 1000_9000 | ||
rate 2* | |||
the value received for |
| ||
|
| ||
| CATV. |
| |
|
|
| |
QAM |
| 16, 32, 64, 128, 256 | |
modulation 1 |
| ||
|
| ||
QAM |
| None, 16, 32, 64, | |
modulation 2 |
| 128, 256 |
*Set up “Symbol rate 2” if the cable provider uses several symbol rates.
H
•When you set “Sweden” in the country setting and select “Cable” for the searching format, you can select the cable provider “ComHem”. Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.
• To abort the initial auto installation in progress, press 6.
10
