Other useful features
Setting when using external devices
Input source settings
Option
Input select
For setting the signal type of external equipment.
| Item |
EXT 1 | Y/C, CVBS, RGB |
|
|
EXT 2 | Y/C, CVBS |
|
|
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
Setup
Input label
You can label each input source with a custom description.
1Press b to select the desired input source.2Go to “MENU” > “Setup” > “Input label”.3Press a/b/c/dto select each character ofthe new name for the input source, and then press ;.CLEAR
BACK
END
4Repeat until the label is fully spelt out.NOTE
•The label can be six characters or less.
•When you want to set an input source label of less than six characters, select “END” to set the name.
INPUT SOURCE
TV
EXT 1
DVD
EXT 3
NOTE
• You cannot change labels if the input source is “TV” or “USB”.
Skipping specified inputs
Setup
Input skip
This setting allows you to skip the SCART, HDMI or RGB input on the input source selection operation.
EXT 1 (SCART) |
|
|
|
|
EXT 2 (SCART) |
|
|
|
|
EXT 4 (RGB) |
|
|
|
|
HDMI 1 |
| Yes | No |
|
HDMI 2 |
|
|
|
|
HDMI 3 |
|
|
|
|
HDMI 4 |
|
|
|
|
Colour system settings
Option
Colour system
You can change the colour system to one that is compatible with the image on the screen.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).
Additional features
Option
Setting display colour
You can change the background colour of the OSD (menu screen), EPG screen, channel display and programme information to blue, gray, red, or green.
Option
Channel selecting effect
This function shows a screen effect when choosing or changing channels.
34
