Setup menu (Continued)
Quick start
You can reduce the TV’s
Selected item | Description |
|
|
On | The TV quickly starts up from standby, |
| more of power consumption is required |
| during standby. |
|
|
Off | Power consumption is less than 1W. |
|
|
Text language
Select from among 5 kinds of language: West Europe, East Europe, Cyrillic, Arabic and Farsi.
NOTE
•Teletext can display only when it is sent by a network. Not used to convert between languages.
Digital setup
Selecting the language
Set up to two preferred multi audio languages to display if the audio languages are available.
1Press MENU and the MENU screen displays.
2 Press c/d to select “
” (Setup).
3Press a/b to select “Digital setup”, and then press ENTER.
4Press a/b to select “Digital audio language”, and then press ENTER.
5Press a/b to select “1st language” or “2nd language”.
6Press c/d to select the desired language.
NOTE
•If audio for the selected languages is not included in a received broadcast, audio will not be output for that language.
Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in the Teletext broadcast if the subtitle languages are available.
1Press MENU and the MENU screen displays.
2 Press c/d to select “
” (Setup).
3Press a/b to select “Digital setup”, and then press ENTER.
4Press a/b to select “Subtitle”, and then press
ENTER.
5Press a/b to select “1st language” or “2nd language”.
6Press c/d to select the desired language.
NOTE
•If subtitles for the selected language are not included in a received broadcast, subtitles will not be shown for that language.
Switching subtitle languages (DVB Subtitle)
Each time you press [ on the remote control, the subtitle switches when the broadcast contains subtitle information.
Set “Hearing impaired” to “On”
(Hearing impaired) 
1st language
Off s s s s s s s s |
| 2nd language |
|
Set “Hearing impaired” to “Off”
1st language 
2nd language
Off s s s s 
(Hearing impaired)
NOTE
•This function is valid only if broadcaster is transmitting multilingual subtittles.
Time zone
This function enables you to select your local time zone.
1Press MENU and the MENU screen displays.
2 Press c/d to select “
” (Setup).
3Press a/b to select “Digital setup”, and then press ENTER.
4Press a/b to select “Time zone”, and then press
ENTER.
5Press c/d to select the desired time zone.
NOTE
•This function lets you select the right time zone in case the time displayed in the EPG does not match the local time of your area.
Identification
You can check the current version of the software on the screen.
Reset
If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.
NOTE
•If you execute “Reset”, all the settings such as “Picture”, “Audio” and “Programme setup” will be reset to the factory preset values.
16
