Watching TV
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
CH Search (Channel search)
Channel auto search makes the TV look for all channels viewable in the set area.
3Press c/d to select "Antenna & Cable" or "Set- top box", and then press ENTER.
5When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press
ENTER.
Antenna & Cable
Start
Cancel
To watch TV via an antenna or cable connection (without using a
To watch TV via a set-top box:
1 Select
corresponding to the terminal connected to the
On | Off |
•When this is set to "On", the channel on the TV
cannot be changed using the remote control unit or menu. (e.g. CH r/s, Favorite CH, etc.)
•See page 31 for details on the Input Skip function.
3 Press INPUT to select the input source corresponding to the terminal connected to the
•See the operation manual of the connected equipment for setting up the equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
4Press c/d to select "Air" or "Cable". Press ENTER to enter the setting.
When "Cable" is selected in Antenna setting: 1Press a/b to select "Analog & Digital Search
Start" to search both analog and digital broadcasts, or to select “Analog Search Start” to search only analog broadcasts, and then press ENTER.
Analog & Digital Search Start
Analog Search Start
Cancel
•The Channel search will start automatically.
•To exit the Channel search screen, select "Cancel", and then press ENTER.
2 The Channel search results may include scrambled channels or channels that are not viewable in the set area. Press c/d to select "Yes", and then press ENTER to remove scrambled channels.
Yes |
|
|
No |
| |
|
|
|
Air
Cable
18
