
Connecting the monitor and turning the monitor on and off
CAUTION! |
| Connect the accessory audio cable | ||
- | When connecting, ensure that both the monitor | When the accessory audio cable is connected to | ||
the audio output terminal of the computer, the | ||||
| and computer are switched off. | |||
| sound of the connected computer is output from | |||
- | Be careful not to over bend the cable or add | |||
the monitor speakers. You can also use the | ||||
| extension cords as this could lead to a | |||
|
|
English
malfunction.
headphone jack of the display.
Connecting the monitor to a computer
Connect the accessory analog signal cable to the analog RGB output terminal of the computer.
Analog RGB terminal (Mini
Audio input terminal
Audio output terminal
Audio cable
Analog signal cable | Analog RGB terminal |
| (Mini |
-Paying attention to connector direction, firmly insert the signal cable vertically into the connector, and then tighten the screws at both sides.
If connecting to a
Macintosh conversion adapter
Note:
-If connecting to the Sun Ultra series, a conversion adapter (commercially available) may be required.
13