Sharp LL-T17D4, LL-T17A4 operation manual Connecting the monitor to a computer

Connecting the monitor and turning the monitor on and off

CAUTION!

-When connecting, ensure that both the monitor and computer are switched off.

-Be careful not to overly bend the cable or add extension cords as this could lead to a malfunction.

Connecting the monitor to a computer

Connecting using accessory analog signal cable

Analog RGB terminal (Mini D-sub 15 pin, 3 row)

Analog signal cable

-Paying attention to connector direction, firmly insert the signal cable vertically into the connector, and then tighten the screws at both sides.

If connecting to a D-sub15 pin 2 row Apple Power Macintosh, attach a Macintosh conversion adapter (commercially available) to the analog signal cable.

Macintosh conversion adapter

Note:

-If connecting to the Sun Ultra series, a conversion adapter (commercially available) may be required.

When connecting using separately sold digital or analog signal cables [LL-T17D4]

The separately sold display cable enables connection between the DVI-I input terminal on the monitor and the digital or analog RGB output terminal of the computer.

When connecting to a digital RGB output terminal:

-Use a digital signal cable. (model name: NL-C04J)

-For digital RGB connection, the monitor has an input for connecting to a computer with a DVI- compatible output connector (DVI-D24 pin or DVI-I29 pin) and SXGA output capability. (Depending on the type of computer to be connected, the display may not work correctly.)

When connecting to an analog RGB output terminal:

-Use an analog signal cable. (model name: NL-C02E)

DVI-I input terminal

Display cable	RGB output terminal
(purchased separately)

-Paying attention to connector direction, firmly insert the signal cable vertically into the connector, and then tighten the screws at both sides.

English Español Italiano Français Deutsch English

11