Connecting the monitor and turning the monitor on and off
Turning the power on
1.Turn on the main power of the monitor.
Main power switch 
-When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction.
2.Press the monitor's power button. The power LED will light up orange.
3.Turn on the computer.
Turn on the computer power
Press power button. 
supply.
ON
When a signal is input from the computer, the power LED lights up green, and the screen is displayed. (After power is turned on, it may take a little time until the screen is displayed.)
Note for
-If the input terminal to which the computer is connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching. (right column)
Notes:
-When using an analog signal, perform an automatic screen adjustment under the following conditions (p.16):
-Using the monitor for the first time.
-After having changed the system settings during use.
-Depending on the type of computer or OS, you may need to install the monitor
-When connecting to a notebook, if the notebook computer's screen is set to display at the same time, the
Changing between input terminals [LL-T17D4]
Use the INPUT button to switch between signal input terminals.
Analog RGB input |
| |||
| terminal |
| terminal | |
|
| INPUT |
|
|
| ||||
|
| |||
| <ANALOG> |
| < | > |
|
|
|
|
|
The input signal type (ANALOG/DIGITAL) is displayed within angle brackets < >.
Note:
-When there is no input signal, [NO SIGNAL] is displayed.
Turning the power off
1.Turn the computer off.
2.Press the monitor's power button. The power LED will disappear.
Turn the computer | Press power button. | ||
off. |
|
|
|
|
|
| |
OFF |
|
|
|
|
|
|
|
If the monitor will not be used for a long time, turn off the main power switch of the monitor, and remove the power plug from the outlet.
English Español Italiano Français Deutsch English
13
