Error Messages
ERROR MESSAGES |
| MEANING |
| REMEDY |
BATT EMPTY | ● The battery is run down. | ● Charge the rechargeable battery or replace the alka- | ||
(LoBATT) |
|
| line battery (or use the AC adaptor for power). | |
BLANK MD | ● Nothing is recorded. | ● Replace the disc with a recorded disc. | ||
(BLANK) |
|
|
| |
Can’t COPY | ● You tried to record from a copy prohibited | ● Record using the analog cable. | ||
(Can’tC) | MiniDisc. | ● Record using the analogue cable. | ||
Can’t EDIT | ● A track cannot be edited. | ● Change the stop position of the track and then edit it. | ||
(Can’tE) |
|
|
| |
Can’t READ * | ● The disc data cannot be read because the disc | ● Reload the disc. | ||
(Can’tS) | is damaged. | ● Replace it with another recorded disc. | ||
(Can’tT) |
|
|
| |
(Can’tU) |
|
|
| |
Can’t REC | ● Recording cannot be performed correctly due to | ● | ||
(Can’tR) | vibration or shock. |
| ||
Can’t STAMP | ● Stamp function does not work. | ● Check the number of tracks. |
Can’t WRITE | ● Cannot save the TOC information correctly to a |
(Can’tW) | MiniDisc. (A large portion of the disc has been |
| damaged.) |
●Replace the disc with another recordable disc.
CHARGEmode ● The Charge/Operation switch is not set to the operation mode when using this unit with the AC adaptor.
●Set the Charge/Operation switch to the operation mode.
DEFECT | ● The disc is scratched. | ● If the sound you hear is not right, record again. |
(DEFECT) |
| ● Replace the disc with another recordable disc. |
DISC FULL | ● The disc is out of recording space. | ● Replace it with another recordable disc. |
● The microprocessor has reported a system fault | ● To have it repaired, go to the distributor where you pur- | |
(ErMD*) | and the unit is out of order. | chased the unit. |
HOLD | ● The unit is in the hold mode. | ● Return the HOLD switch to its original position. |
(HOLD) |
|
|
LOCKED | ● You removed a MiniDisc while recording or | ● Turn off the power and remove the MiniDisc. |
(Can’tLOCK) | editing. |
|
|
|
|
ERROR MESSAGES |
| MEANING |
| REMEDY |
NO DISC | ● A disc has not been loaded. | ● Load a disc. | ||
NO SIGNAL | ● Poor connection of the digital cable. | ● Connect the digital cable securely. | ||
(noSIG.) | ● No output signal comes out from the connected | ● If the portable CD player has a function to prevent sound | ||
|
| unit to playback. | skips, deactivate it. | |
|
| ● The input signal has improper sampling fre- | ● Playback with the connected unit. | |
|
| quency. |
|
PLAY MD | ● You recorded on a |
(PLAYmd)
●Replace it with a recordable disc.
POWER ? ● The battery charger is defective.
●To have it repaired, go to the distributor where you purchased the unit.
PROTECTED ● The write protection tab of a MiniDisc is set to the protected position.
●You tried to record on a
●Move the write protection tab back to its original position.
●Replace it with a recordable MiniDisc.
SORRY | ● Since a track number is currently being located |
(Sorry) | or updated, the unit cannot accept your com- |
| mand. |
●Wait for a while and try the operation again.
TEMP OVER | ● The temperature is too high. | ● Turn off the power, and wait for a while. |
(TEMP!) |
|
|
TOC FORM ** | ● There is an error in the recording signal. | ● Erase all of the tracks, and then record again. |
(Tform**) |
|
|
TOC FULL | ● There is no space left for recording character | ● Replace it with another recordable disc. |
| information (track names, disc names, etc.). |
|
Tr. Protect | ● The track has been protected from being erased. | ● Edit the track with the device on which it was recorded. |
? DISC | ● A disc which contains data other than music was |
(? DISC) | played. |
| ● There is an error in the signal recorded on the |
| disc. |
| ● Stamping is not possible. |
●A disc which contains
●Replace it with another recorded disc.
●Retry.
( ) : Error messages seen on the remote control. Number or symbol appears in * position.
– 6 –