POWER SOURCE

This unit can be used with 4 different power sources: a rechargeable battery, an AC adaptor, an optionally available battery case (AD-S30BC), and an optionally available car adaptor (AD-CA20X).

1

 

 

OPEN

2

Mark

 

OPEN

5

 

OFF

 

 

To the

 

DC IN 5V

 

jack

POWER

4

 

Insert

 

securely,

 

all the way

 

in.

 

 

AC 120V, 60 Hz

■Rechargeable battery power

When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully.

1 Open the rechargeable battery com- partment cover.

2 Insert the rechargeable battery.

●Insert the side with the arrow first.

3 Close the rechargeable battery com- partment cover.

4 Plug the AC adaptor into the AC outlet, and then insert the plug on the AC adaptor cord into the DC IN 5V jack.

5 Press the ■:OFF button to begin charg- ing.

●The POWER indicator will flash, and the battery will begin charging.

●Battery charging will be complete in 3 hours. When the battery is fully charged, the POWER indicator will go out.

Notes:

●After charging is complete, the AC adaptor may be left connected.

(For example, when charging at night)

●The battery will not be charged when- ever the power to the main unit is turned on.

●If the operation in step 5 is performed without inserting the rechargeable bat- tery, the POWER indicator will flash for 5 seconds. This is normal.

●Do not force open the rechargeable battery cover too far.

●Do not attach the optionally available battery case when charging the internal battery.

6

MD-S301

Page 7
Image 7
Sharp MD-S301 operation manual Power Source, Rechargeable battery power