CONVENIENT PLAYBACK FUNCTIONS

APSS

(Auto Program Search System)

APSS automatically locates the beginning of any track.

To move to the beginning of the next track:

Press the 0/4(4) button during play- back.

To re-start the track being played: Press the 5 button during playback.

To skip a number of tracks at one time, press the 5 or 0/4 (4) button re- peatedly until the desired track number is shown.

To begin playback at a desired track, press the 5 or 4 button while in the stop mode to select the track number. Then press the 0/4 (06) button.

Note:

When the first track is selected and the 5button is pressed, the last track on the disc will be located. When the last track is selected and the 0/4 (4) button is pressed, the first track will be located.

Cue and review

1 Load a MiniDisc and begin playback.

2 Press and hold down the 0/4 (4) button for audible fast forward, or press and hold down the 5 button for audible fast reverse.

3 Normal playback will resume when the

5or 0/4(4) button is released.

Notes:

When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode.

When the unit is in the all track repeat mode, the search will wrap around from the last track to the first, or vice versa.

Depending on the contents recorded on a MiniDisc, some sounds may be skipped while cueing and reviewing.

To search very quickly:

When fast forward or fast reverse is used while in the pause mode, the search will be performed more quickly than during audible fast forward or fast reverse play- back.

In this mode, no sound is heard. There- fore, you should refer to the time dis- play.

When you lift your finger, the unit will re-enter the pause mode.

10

MD-S301

Page 11
Image 11
Sharp MD-S301 operation manual Convenient Playback Functions, Cue and review, To move to the beginning of the next track