PLAYING A MINIDISC
Headphones |
|
|
| To the | jack |
For the |
| BASS |
left (L) |
|
|
For the | Remote |
|
right (R) | control unit |
|
|
|
1 Insert the headphones plug firmly into the headphones jack on the remote control unit.
2 Plug the remote control unit into the
jack on the main unit. Push the plug all the way in.
●Since the remote control unit plug has only one correct orientation, plug it in as shown in the drawing.
3 Load a MiniDisc in the direction indi- cated by the arrow on the MiniDisc, with the label side facing up. (Insert the Mini- Disc firmly, until a click is heard.)
●The power will be turned on automat- ically, and playback will start from the first track.
When track names are included on the MiniDisc, the track names will be scrolled.
4 Press the VOLUME + button to in- crease the volume and the VOLUME – button to decrease the volume.
(0 - 30) 
5 Adjust the bass level.
Each time the BASS button is pressed, the tone will be switched as follows:
|
| Bass is emphasized a little. | |
BASS 1 | |||
|
| Bass is emphasized more. | |
BASS 2 | |||
|
| Bass is emphasized still | |
BASS 3 | |||
more. | |||
|
| ||
BASS 0 | Bass emphasis is canceled. | ||
|
|
| |
Track number
●After playback of the last track has fin- ished, the unit will stop automatically.
●The most recent volume or bass set- tings are saved when the power is turned off.
Note:
●Whenever any button is pressed, the remote control display will light for about 4 seconds.
8
