Sharp MX-2700G Before Using The Machine, Part Names And Functions, Exterior, OPERATION PANEL page

1 BEFORE USING THE MACHINE

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

(2) (3) (4) (5) (6) (7)

When an automatic document feeder is not installed.

(1)Document cover*1, *2

This holds down the original.

(2)Reversing single pass feeder*1, *2 (automatic document feeder)

This automatically feeds and scans multiple originals. Both sides of two-sided originals can be automatically scanned.

☞PLACING THE ORIGINAL (page 33)

(3)Front cover

Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.

☞TURNING THE POWER ON AND OFF (page 13)

☞REPLACING THE TONER CARTRIDGES (page 58)

(4)Paper pass unit*1

This transfers output to the saddle stitch finisher.

When a finisher, paper pass unit and saddle stitch finisher (peripheral devices) are not installed.

(8)

When a finisher (peripheral device) is installed.

(5)Operation panel

This is used to select functions and enter the number of copies.

☞OPERATION PANEL (page 9)

(6)Exit tray unit (right tray)*1

When installed, output can be delivered to this tray.

(7)Output tray (centre tray)

Copy jobs and print jobs are delivered to this tray.

(8)Finisher*1

This can be used to staple output. A punch module can also be installed to punch holes in output.

☞FINISHER (page 40)

*1 Peripheral Devices

The peripheral devices are generally optional, however, some models include certain peripheral devices as standard equipment.

*2 The MX-2300N/MX-2700N are equipped as standard with peripheral devices. On the MX-2300G/MX-2700G, you can select whether to equip the machine with a document cover or a reversing single pass feeder.

4