Sharp MX-6500N, MX-7500N Saddle Stitch, Trimmer Setting, Folding function, Punch function

Saddle Stitch

(When a saddle finisher is installed)	Scanning 2-Sided originals
Copies can be folded at the centre, stapled, and output.
(When a trimming module is installed on the saddle finisher)
For saddle folding, it trims a side drop, offering a good-looking output	Tap this to switch the cover setting Off or On, or to
image.	configure the paper tray settings.
Releases saddle stitch	Scans 1-Sided originals
This selects left binding
This selects right binding

Trimmer Setting

(When a trimming module is installed on the saddle finisher) Enabling "Saddle Stitch" allows you to configure the trimmer settings.

Turns off the trimmer setting

Turns on the trimmer setting

Specify the trimming width within the range of 2.0 to 20.0 mm

Folding function

(When a saddle finisher or folding unit is installed) Copies can be folded and output.

Selects saddle fold

Selects Z-fold

Selects C-fold

Selects accordion fold

Selects double fold

Selects half fold

Detail setting screen for each folding type

Folds paper so that the print side faces downward	Select the size of paper to be folded with
during output	Z-fold
	(One of either A3, B4, A4R, 11” x 17”,
Folds paper so that the print side faces upward
	8-1/2” x 14” and 8-1/2” x 11”R can be
during output	selected)
Select this option to fold multiple sheets together	Folds paper for left binding during output
Displays a folding image	Folds paper for right binding during output

Punch function

(When a punch module is installed)

This function punches copies and outputs them. It is available for paper sizes B5R to A3.

Punches holes during output

COPY OUTPUT 23