COPY OUTPUT |
|
|
|
Configure the output settings for copies using Sort, Group, Offset, Staple, Punch, or Fold. |
|
| |
Basic operations |
|
|
|
1 Select [Output] | 2 Copy output settings | 3 Check the preview image | 4 Start (Black & white, or colour) |
 |
|
|
|
1Specify the output tray
2Select the output and paper output type
3Specify the details of output mode
Output tray settings
Output tray settings
Specify the destination to output copies.
The output tray currently selected is indicated by an arrow.
(When a finisher
The [Middle Tray] key can be selected.
Outputs to the offset tray
Outputs to the right tray
If the offset, staple sort, saddle stitch, fold, or punch function is specified, the right tray is not available.
Sort/Group function
This function sets the sorting method when copying a scanned original.
Sorts the scanned original on a set basis, and outputs them
Groups the scanned original on a page basis, and outputs them.
Offset function
(When a finisher or saddle finisher is installed)
Select this function when you wish to output copies while shifting them set by set.
Selecting the staple function clears the Offset checkmark automatically.
Sort staple
(When a finisher or saddle finisher is installed)
This function staples the output copies and deliver them to the tray.
1 staple in back
1 staple in front
2 Staples
Copies can be folded at the centre, stapled, and output.
This function is only available when a saddle finisher is installed.
22
