Sharp MX-FR26U, MX-FR27U, MX-FR28U manual Copy Ratio

Document Control Setting

Step 3: Select settings as desired from the special modes menu screen and then press the [COLOR START] key or the [BLACK & WHITE START] key. (MX- FR28U only)

● If either the [C(Cyan)] key or the [Y(Yellow)] key is touched in step 2, the [BLACK & WHITE START] key cannot be pressed.

●When the color mode is single color, document control pattern printing is not possible.

Combining the document control function with other functions

Function
combined with	Operation of document control pattern printing
document control
Exposure	The pattern is always printed at the same exposure regardless of the exposure
	setting.
Copy Ratio	The pattern is always printed at the same ratio regardless of the ratio setting.
Duplex	The pattern is printed on the back side as well as the front side when 2-sided
	copy is performed. (The orientation of the original, tablet or book, is not taken
	into account.)
Rotation Copy	The pattern does not change when rotation copy is used. (The orientation of
setting	the pattern depends on the orientation of the paper in the tray.)
Margin Shift	The position of the pattern does not change when margin shift is used. (The
	margin width does not affect the position of the pattern.)
Erase	The pattern is printed normally on the edge that is erased.
Pamphlet Copy	Printed based on the paper used for pamphlet copy.
Job Build	The pattern is printed normally.
2in1	Printed based on the paper. The pattern is printed normally on the sheet of
	paper.
Card Shot	The pattern is printed once each time the front side and the back side of the
	original are scanned.
Stamp	If the pattern and the stamp item overlap, the pattern is given priority.
Photo Repeat	The pattern is printed once for one scan of a photo.
Mirror Image	The pattern is printed in the normal orientation without being inverted.
Centering	The pattern is printed normally.
B/W Reverse	Patterns are printed normally without black/white inversion.
Bus. Card Scan	The pattern is printed normally.
(8 Business Cards
Layout)
Other functions	The pattern is printed normally when RGB Adjust*, Sharpness, Suppress
	Background, Color Balance*, Brightness and/or Intensity settings are used.
	* MX-FR28U only

26