Sharp MX-M850, MX-M1100 Changing the Exposure and Original Image Type, Specify the destination

CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE

Exposure and original image type settings can be selected as appropriate for the original.

The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained below.

The side to be scanned must be face up!

1 Place the originals.

When using the document glass, place the original with the side to be scanned face down.

(2)

Scan Internet Fax Fax Data Entry USB Mem. Scan

Address Book Original Scan: Auto A4 Send: Auto

(1)Entry Exposure Auto Text

	(3)
Send Settings
		200X200dpi
Address Review	File Format		PDF	PDF
File	Colour Mode		Auto/Greyscale
Quick File	Special Modes

When Fax/I-Fax address is included, exposure setting shared among Fax/ I-Fax/ Scanner mode is selected.

OK

(4)

2 Select settings in the touch panel.

(1)Specify the destination.

For the procedures for specifying a destination, see "CONVENIENT TRANSMISSION METHODS" (page 72).

(2)Make sure that the desired mode ([Scan] tab) is selected.

(3)Touch the [Exposure] key.

(4)Read the displayed message and touch the [OK] key.

Scan/Exposure											OK
									(8)
		Auto
					Original Image Type
		Manual
		(5)
							Text	Text/		Text/Photo
								Prtd.Photo
								(7)
						Printed				Map
	1	3		5			Photo
			(6)
							Moiré Reduction

(5)Touch the [Manual] key.

(6)Darken light colours with the key.

5 levels are available for the exposure. Darken light

originals with the key, and lighten dark originals

with the key.

(7)Touch the [Text/Prtd. Photo] key.

In Internet fax/fax mode, the original image type and moire reduction cannot be selected.

(8)Touch the [OK] key.

3 Press the [START] key.

Cancel scanning

77