4. Adjust the angle

Adjust the projector angle

Adjust the projector angle using the Height Adjustment buttons.

Rotate the Tilt dial to adjust the horizontal tilt of the projector.

Height Adjustment

buttons

Tilt dial

This projector is equipped with an “Auto V-Keystone Correction” function that automatically corrects any trapezoidal distortion within the projected image.

Start QuickPages 31, 32
5. Adjust the focus and the zoom

Bring the projected image into focus

Adjust the projected image size

Bring the projected image into focus by

Adjust the projected image size by moving the

rotating the focus ring.

zoom knob.

Focus ring

Zoom knob

out

Zoom

in

Zoom

Page 33

6. Select the INPUT mode

Select the “COMPUTER 1” using the INPUT buttons on the projector or the COMPUTER 1 button on the remote control.

On the

On the remote

" INPUT list

" On-screen Display (RGB)

projector

control

INPUT

COMPUTER1

 

 

 

 

COMPUTER1

RGB

 

 

1024 768

 

 

 

 

 

COMPUTER2

 

 

 

D DVI-D Computer

 

When you press the INPUT buttons on the projector, the INPUT list appears.

Press '/" to select an item on the list, and press ENTER to switch to the selected INPUT mode.

When using the remote control, press COMPUTER1/2, DVI, S-VIDEO or VIDEO to switch the INPUT mode.

Page 34

7. Turn the Power off

Press the STANDBY button, then press that button again while the confirmation message is displayed, to put the projector into standby mode. " On-screen Display

On the projector

On the remote control

Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.

Page 30

-17