Image Projection

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press COMPUTER1/2, DVI, S-VIDEO or VIDEO on the remote control to select the input mode.

When you press INPUT on the projector or DVI

on the remote control, the INPUT list appears. Press '/" to switch the INPUT mode.

Adjusting the Volume

Press VOL +/– on the remote control or \/ + on the projector to adjust the volume.

Note

Pressing VOL–/–\will lower the volume.

Pressing VOL+/+ will raise the volume.

When the projector is connected to exter- nal equipment, the volume level of the ex- ternal equipment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/off or when changing the input signal.

When you do not want to output the sound from the projector’s speaker while the pro- jector is connected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 51.)

Displaying the Black Screen and Turning off the Sound Temporarily

Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound.

Note

Pressing AV MUTE again will turn the pro- jected image back on.

VOL +/– (Volume) buttonsAV MUTE buttonsCOMPUTER 1,COMPUTER 2,DVI, S-VIDEO,VIDEO buttons

On-screen display

On-screen display

-34