
2DHCP Client Setting
Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.
Selectable items | Description |
On | Obtains configuration parameters for |
| TCP/IP network automatically. |
Off | Sets the TCP/IP manually. |
Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.
If the DHCP server is not available, “Could not obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the item 3.)
3TCP/IP Setting
Set the TCP/IP manually.1 Select “Off” for “DHCP Client”, then press ENTER.2 Select “TCP/IP”, then press ENTER.3 Enter “IP Address” using ', ", and \, then press ENTER.Network
Setting the TCP/IP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
IP Address | 1 | 9 | 2 | . | 1 6 8 | . 1 5 0 | . 0 0 2 | ||
Subnet Mask | 2 5 5 | . | 2 5 5 | . | 2 5 5 | . | 0 0 0 | ||
Gateway | 0 0 0 | . | 0 0 0 | . | 0 0 0 | . | 0 0 0 |
| Menu operation | Page 43 |
|
|
|
Selectable items | Description |
|
IP Address | Factory default setting: |
|
| 192.168.150.002 |
|
| Enter an IP address appropriate for the | |
| network. |
|
Subnet Mask | Factory default setting: |
|
| 255.255.255.000 |
|
| Set the subnet mask to the same as | |
| that of the computer and equipment on | |
| the network. |
|
Gateway | Factory default setting: 000. 000. 000. | |
| 000 |
|
| * When not in use, set to “000. 000. | |
| 000. 000”. |
|
Note
•Confirm the existing network’s segment (IP ad- dress group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don’t have to change the projector IP address.
•For details about each setting, consult your network administrator.
4Confirming the Projector Information
You can confirm the MAC address and projector name.Displayed items | Description |
MAC Address | The MAC address of the projector is |
| displayed. |
Projector | The projector name is displayed. |
Note
•For information on how to change the projector name, see “SETUP MANUAL” contained in the supplied
Features Useful
-55