Sharp PG-C355W Computer Compatibility Chart, DTV, Computer

Computer Compatibility Chart

Computer

• Multiple signal support	Pixel Clock: 12–170 MHz
Horizontal Frequency: 15–110 kHz	Sync signal: Compatible with TTL level
Vertical Frequency: 43–85 Hz	• Compatible with sync on green signal

The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards.

Mode	Resolution				Horizontal Frequency	Vertical Frequency	Analog RGB	VESA	Digital RGB
					(kHz)	(Hz)	Support		Support
	640 ⋅ 350	27.0				60
		31.5				70
		37.9				85		✔
	640 ⋅ 400	27.0				60
		31.5				70			✔
			37.9			85		✔
	720 ⋅ 350	27.0				60
VGA		31.5				70
	720 ⋅ 400	27.0				60
		31.5				70
				37.9		85		✔
		26.2				50
		31.5				60		✔
	640 ⋅ 480	34.7				70
		37.9				72
		37.5				75		✔
		43.3				85
		31.3				50
		35.2				56		✔
SVGA	800 ⋅ 600	37.9				60
		46.6				70
		48.1				72
		46.9				75		✔	✔
		53.7				85	✔
		40.3				50
XGA	1024 ⋅ 768	48.4				60
		56.5				70		✔
		60.0				75
		68.7				85
	1280 ⋅ 720	45.0				60
	1280 ⋅ 768	47.8				60
WXGA	1280 ⋅ 800	49.7				60		✔
		62.8				75
	1360 ⋅ 768	47.7				60
	1366 ⋅ 768	47.8				60
	1152 ⋅ 864	55.0				60
SXGA		66.2				70
					67.5	75
	1280 ⋅ 1024	64.0				60		✔
		80.0				75
SXGA+	1400 ⋅ 1050	64.0				60
		65.3				60		✔
UXGA	1600 ⋅ 1200	75.0				60
MAC 13"	640 ⋅ 480	34.9				67
MAC 16"	832 ⋅ 624	49.7				75
MAC 19"	1024 ⋅ 768	60.2				75
MAC 21"	1152 ⋅ 870	68.7				75

Note

•This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual.

•When this projector receives 640 ⋅ 350 VESA format VGA signals, “640 ⋅ 400” appears on the screen.

•When projecting the RGB interlace signal using COMPUTER/COMPONENT 1, 2 or DVI-D with “Signal Type” set to “Auto” or “RGB”, the image may not be projected as desired. In this case, use either Video or S-Video.

•Depending on the computer you are using, the output signal may not be faithful to the “Screen resolution” adjustment. Check the settings of the computer’s signal output. If the settings cannot be changed, it is recom- mended that the resolution be set to the one that corresponds to “1280 ⋅ 800”.

DTV

Signal	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	DVI Support	Appendix
720P	45.0	60	✔
480I	15.7	60
480P	31.5	60	✔
540P	33.8	60
576I	15.6	50
576P	31.3	50	✔
720P	37.5	50	✔
1080I	28.1	50	✔
1080I	33.8	60	✔
1080P	56.3	50	✔
1080P	67.5	60	✔

-65