MOUSE/Adjustment buttons ('/"/\/)BREAK TIMER button
AUTO SYNCFREEZE

button

button

 

ECO+QUIET button

Displaying and Setting the Break Timer

1 Press BREAK TIMER.

•The timer starts to count down from 5 min- utes.

On-screen display

2 Press '/"/\/to adjust the length of the break time.•Increases with ' or

5 minutes s6 minutes s60 minutes

•Shortens with \ or "

4 minutes s3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Press BREAK TIMER.

Note

•Break Timer does not function while the projec- tor is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Switching the Eco+Quiet Mode

PressECO+QUIETto switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consump- tion will decrease, and the lamp life will extend.

Note

•Refer to “Checking the Lamp Life Status” on page 53 for details of the Eco+Quiet mode.

Auto Sync

(Auto Sync Adjustment)

Auto Sync function works when detecting input signal after the projector turns on.

Press AUTO SYNC to manually adjust with Auto Sync function.

Note

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 47.)

Freezing a Moving Image

1 Press FREEZE.

•The projected image is frozen.

2 Press FREEZE again to return to the moving image from the currently connected device.

Operation Basic

-35