Sharp PG-M10X Advanced Menu Settings, Setting the Video Type, Selecting the Color System

Advanced Menu Settings

Set the colors as desired in accordance with the image contents.

Subtle color settings are possible, as desired. Setting is possible for each input.

1 Select the image to be input (page 20).

2 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “COLOR”.

3 Use the cursor / keys to select “GAMMA”.

4 Use the cursor ￿ / ￿ keys to set the “GAMMA”.

The following can be selected.

●Normal ● Natural ● Real ● Custom

Normal is standard settings; Natural stresses coloring; Real stresses brightness. Custom is used to adjust freely as desired.

5 Use the cursor ￿ / ￿ keys to select “CUSTOM”, press the ENTER button to display the sub-menu and then set the gamma value. There are 33 index values.

Setting the Video Type

1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “COLOR”.

2 Use the cursor / keys to select “VIDEO TYPE”.

3 Use the cursor ￿ / ￿ keys to set the “VIDEO

TYPE”.

The following can be selected.

●DVD ● VCR

DVD is used for DVD players and Video is used for normal video players.

Selecting the Color System

The following color systems can be used with this unit.

●NTSC ● NTSC 4.43

● PAL ● PAL-M ● PAL-N ● PAL60

●SECAM

•Only “NTSC” and “PAL” can be used for component video.

•Selection is automatic when “AUTO” is used.

•“AUTO” cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “COLOR SYSTEM” menu for PAL-M and PAL-N input signals.

Menu Operation

Adjusting Color Balance

Color balance (white balance) can be set for each input.

1 Select the image to be input (page 20).

2 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “COLOR”.

3 Use the cursor / keys to select “COLOR TEMP”.

4 Use the cursor ￿ / ￿ keys to select the “COLOR TEMP”.

Four different types of color balance can be set beforehand: Low, Middle, Normal and High.

When the ENTER button is pressed, the sub- menu will be displayed to enable fine adjustment.

1 Select an input for the color system to be selected (page 20).

2 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor ￿ / ￿ keys to select “COLOR”.

3 Use the cursor / keys to select “COLOR SYSTEM” and then press the ENTER button.

4 Use the cursor / keys to select the desired color system.

To close the menu

Press the R-CLICK/EXIT button.

30