Initial Settings
Auto Source Settings
With this function, the unit is automatically detecting the input signal.
1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor / keys to select “SETUP”.
2 Use the cursor 
/ 
keys to select “AUTO SOURCE”, then use the cursor / keys to set “ON” or “OFF”.
ON: All input signals are detected.
OFF: Remote control VIDEO button: Video and
All input signals are detected individually.
Using the Power Saving Function
When there is no signal input for a period of 5 min. or more, the power is automatically turned off and standby status is activated.
1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor / buttons to select “SETUP”.
2 When “SETUP” menu is displayed, use the cursor 
/ 
keys to select “AUTO POWER OFF”.
3 Use the cursor / keys to set Power
Saving to “ON” or “OFF”.
Selecting a Projection Format
If the projection format is not correctly set in accordance with the installation conditions, images may be projected reversed, vertically, or horizontally.
1 With the FLIP COVER of the remote control open, press the MENU button to display the Advanced menu, then use the cursor / keys to select “SETUP”.
2 When “SETUP” menu is displayed, use the cursor 
/ 
keys to select “PROJECTION”, then press the ENTER button.
3 Use the cursor 
/ 
keys to select a projection format in accordance with the set conditions.
The setting items will change as shown below each time a key is pressed.
NORMAL ⇔ VERTICALLY+HORIZONTALLY
⇔ | ⇔ |
REVERSED VERTICALLY | ⇔ REVERSED HORIZONTALLY |
•The unit cannot be installed to the ceiling.
•Be sure to always leave a space of minimally 20 cm (7 7/8") between the unit and surrounding obstructions.
•Do not use an installation stand made of material that is not
•During an earthquake or when a child climbs on top of or hangs from the stand, the unit may fall. Use a wall or a post as a measure to prevent the unit from falling.
Menu Operation
To close the menu
Press the
33
