Sharp 2Resolution Setting, 3Signal Type Setting, Useful Features, 4Selecting the Dynamic Range, 1Adjusting the Computer Image

Signal Adjustment (“SIG-ADJ” Menu)

Menu operation n Page 40

	Pict.	SIG-ADJ	SCR PRJ1 PRJ2
			0
	Clock
1	Phase		0
	H-Pos		0
	V-Pos		0
	Reset
2	Resolution		1024 x 768
3	Signal Type		Auto
4	Dynamic Range		Standard
5	Video System		Auto
6	Video Setup		0 IRE

7Signal Info 1024 x 768

H	48.3 kHz / V	60.0 Hz
SEL./ADJ.	ENTER	END

1Adjusting the Computer Image

If the optimum image cannot be obtained with Auto Sync adjustment, use the SIG-ADJ function.

Selectable	Description
items
Clock	Adjusts vertical noise.
Phase	Adjusts horizontal noise (similar to
	tracking on your VCR).
H-Pos	Centers the on-screen image by
	moving it to the left or right.
V-Pos	Centers the on-screen image by
	moving it up or down.

Note

•  To reset all adjustment items, select “Reset” and press ENTER.

•The adjustable range of “H-Pos” (H-Position) and “V-Pos” (V-Position) may vary depending on the screen resolution of the computer.

2Resolution Setting

Ordinarily, the type of input signal is detected and the correct Resolution mode is automatically selected. However, for some signals, the optimal Resolution mode in “Resolution” may need to be selected to match the computer display mode.

Note

•  See “Checking the Input Signal” on page 46 for information on the currently selected input signal.

3Signal Type Setting

This function allows you to select the input signal type RGB or Component for

COMPUTER/COMPONENT.

Selectable	Description
items
Auto	Input signals are automatically
	recognized as RGB or component.
RGB	Set when RGB signals are received.
YPbPr	Set when Component signals are
	received.

4Selecting the Dynamic Range

An optimum picture may not be displayed if an HDMI-capable device’s output signal type and the projector’s input signal type do not match. If this should occur, switch “Dynamic Range”.

Selectable	Description
items
Auto	In most circumstances, “Auto” should
	be selected.
Standard	When the black levels of the image
	show banding or appear faded, select
Enhanced
	the item that results in the best picture
	quality.

Note

•  The Dynamic Range can be selected only when “HDMI” input mode is selected.

Useful Features

45