Equipment | Terminal on | Cable | Terminal on the | |
connected equipment | projector | |||
|
| |||
Camera/Video game |
| Cables for a camera or a video game/3 RCA to | COMPUTER/ | |
|
| mini | COMPONENT 1, 2 | |
| Component |
|
| |
| video |
|
| |
| output |
|
| |
| terminal | RCA adaptor plug |
| |
|
| (commercially available) |
| |
| Video | Cables for a camera or a video game | VIDEO | |
|
|
| ||
| output |
|
| |
| terminal |
|
| |
Monitor | RGB | RGB cable (supplied or commercially | MONITOR OUT | |
| input | available) |
| |
| terminal |
|
| |
Amplifier | ø3.5 mm | ø3.5 mm stereo or mono audio cable |
| |
| (commercially available or available |
| ||
| audio input | as Sharp service part QCNWGA038WJPZ) |
| |
| terminal |
| AUDIO OUT | |
| RCA audio | ø3.5 mm stereo minijack to RCA audio cable |
| |
| (commercially available) |
| ||
| input |
|
| |
| terminal |
|
|
Note
•You can also use the MONITOR OUT terminal as the COMPUTER/COMPONENT 2 terminal. To use this terminal as an output terminal, set “COMPUTER2 Select” to “Monitor Output” before connecting the external equipment. (See page 52.)
•When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.
•You can select AUDIO 1 or AUDIO 2 in the INPUT list. (See page 30.)
•RGB signals and Component signals can be output to the monitor.
This projector is able to process the following signals when connected to HDMI equipment:
•Video signal: For details, see “Digital Support” in the list of “Compatibility Chart” on page 67.
•Audio signal: Linear PCM audio
•Sampling frequency: 48kHz/44.1kHz/32kHz
22