Adjusting the Projector Function
7Keylock Function
Use this function to lock the operation buttons on the projector.
This function can be set using either the menu screen or ENTER on the projector.
aSetting with the menu screen
Selectable | Description | |
items | ||
| ||
|
| |
On | All buttons on the projector, except | |
| STANDBY/ON, are locked. | |
Off | Turns off the Keylock function. |
aSetting with the projector buttons
Locking the Operation Buttons
1 Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.
• The Keylock function screen is displayed.
PRJ - ADJ1
Use this function to lock the operation buttons on the projector.
(Except STANDBY/ON button)
Note: You can release the keylock by holding down ENTER on the projector for about 5 seconds.
Return
On
SEL. | ENTER | END |
2 Select “On”, then press ENTER.
•The Keylock function does not affect the operation with the remote control buttons.
•You cannot use the Keylock function while the projector is warming up.
Taking the Keylock Off
Hold down ENTER on the projector for about 5 seconds.
Menu operation n Page 40
Info
•Even when Keylock function is set to “On”, STANDBY/ON on the projector can be used to turn on and off the power.
•Keylock cannot be set while the projector is: displaying the “Setup Guide” or “Menu” screens, in Standby mode, warming up, changing input signals, operating the Auto Sync or Input Search function, in Freeze mode or on the “System Lock” screen during warming up.
8Selecting the Quick Start Menu
Selectable items | Description |
On | Pressing MENU displays the |
| Quick Start Menu screen. |
Off | Pressing MENU displays the |
| Complete Menu screen. |
9COMPUTER2 Select
You can also use the MONITOR OUT terminal as the COMPUTER/COMPONENT 2 terminal. Select whether to use the terminal as an input terminal or output terminal.
Selectable items | Description | |
|
| |
Input | The terminal can be used as an | |
| input terminal (COMPUTER/ | |
| COMPONENT 2). | |
Monitor Output | The terminal can be used as an | |
output terminal (MONITOR | ||
| ||
| OUT). |
Note
•Set this before connecting the external equipment.
•The setting cannot be changed when Input mode is “COMPUTER 2”.
52